ZAGE-D-ESAU3-R
Build-to-Order - 5x SATA Drives to eSATA and USB3.0 with Hardware RAID Adapter
  • Supports SATA I/II Hard Drives, Optical Drives, and Blu-Ray Drives
  • Supports eSATA I, eSATA II, USB2.0 and USB3.0 host connection
  • Hardware RAID Board with SCSI-1 (Centronic 50pin) Metal frame and Mounting hole
  • Hardware RAID controller on board for max performance
  • Supports RAID 0, RAID 1, RAID 3, RAID 5, RAID 10, JBOD (BigDrive mode), Clone, Individual Drives (PM mode)
  • DIP Switch on board for easy Hardware RAID configuration
  • Supports Hot-swapping
  • 12 LED Pin Headers for active LED of Host & 5 SATA devices
  • Compliant with Universal Serial Bus 3.0 Specification Revision 1.0
  • Supports SuperSpeed (5 Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transfer rate
  • Supports Windows 7, Vista, XP, 2003, 2008, Mac OS X and Linux kernel 2.4 and above for software utility (RAID management and configuration)
  • OS independent
  • Support 48-bit LBA addressing
  • Supports Native Command Queue (NCQ)
  • Supports individual drive mode via eSATA* or USB connection
  • independent drive configuration and optical drive are supported via eSATA only when connecting to controllers that are Port Multiplier compatible
  • eSATA Chipset: JMicron JMB393





Product Introduction

SUPPORT

Providing technical support as of top priority.
Contact us today!
tech support contact info:
Tel: 1-626-303-8885

Product Support Request

Model NumberZAGE-D-ESAU3-R
RoHS Compliance VersionYes
Host InterfaceeSATA/ USB 3.0
OS SupportOS independent
Raid Level0,1,3,5,10,JBOD (Big drive mode), Clone, Individual (PM mode)
Dimensions (WxHxD)2.20" x 0.90" x 3.40"
55.9 mm x 22.9 mm x 86.4 mm
Notes- only one hard drive can be recognized via eSATA connection in Individual Drive Mode if the eSATA host controller does not support Port Multiplier function
Download
FAQ


There are no FAQ entries for this model.
Accessories

ImageAccessoryDescription

Connection Diagram
Featured Videos